Bio-Circle L, the Bio-Circle system’s cleaning solution, combines leading-edge research in cleaning agents and bioremediation in one powerful and safe cleaning solution. WALTER designed the solution with the following characteristics:
• pH neutral chemistry that safely cleans plastics, aluminum, and other sensitive surfaces
• Corrosion inhibitors to prevent flash rusting
• Unique formulation
• Safe, non-toxic, and biodegradable
Furthermore, Bio-Circle L maintains its cleaning power over time unlike other cleaning methods. The system eliminates the need for frequent replenishment, monthly waste disposal and the toxic material management challenges associated with solvent-based cleaning systems. Simply “top off” the solution periodically to offset natural evaporation and draw-out.
New and improved Bio-Circle L is an innovative, pH neutral cleaner specifically designed for use with the Bio-Circle parts cleaning system. It effectively removes oil and grease from parts while maintaining its cleaning power over time thanks to self-cleaning action of natural bioremediation. It is the safest, most effective replacement for hazardous mineral solvents in manual parts cleaning applications, eliminating health & safety risks and frequent waste disposal
• Powerful cleaning action removes and breaks down oil and grease
• New non-stick formula helps lift and flush away toughest grease
• Self-cleaning action remediates hydrocarbons into H20 and CO2
• Safe, non-flammable, non WHMIS controlled, solvent-free, pH neutral
• Safe on all metals and most surfaces
• Contains temporary corrosion inhibitors
• Non-soapy, pleasant scent
• NSF Registered
Applications:
Bio-Circle L remediates:
• Most types of mineral oils
• Most cutting lubricants
• Most NLGI 2 and lower, mineral greases, more specifically
• Chassis and bearing grease
• Polyuera grease
• Impact grease
• Water resistant bearing grease
• High temperature moly grease
• Heavy-duty tacky grease
• Food grade grease
• Carbon deposits
• Fresh tar and resin products
In parts cleaning applications such as:
• General plant, tool and fleet maintenance
• Production
• Maintenance
Recommendations for Use:
• Use only with the Bio-Circle parts cleaning system
• Not recommended for some synthetic greases and oils, NLGI 3 and higher or baked in grease
• Use OMNI Cleaner/Degreaser (53-X 003) to loosen stubborn dirt and grease
Technical Specifications:
Working Temperature: up to 41°C (106°F)
Physical state: cloudy liquid, apple scent
pH: 8
Specific gravity: 1.02 (20°C/68°F)
Flammable: No
Flashpoint: No
Engineering controls: Ensure temperature between 37°C and 43°C (100°F-109°F), aeration and proper level of liquid during use
Incompatible substances: solvents, biocides, alkaline, acid and chlorinated solutions
Microorganisms: Naturally occurring, BSL 1 (non-pathogen)
WHMIS: Not controlled
Storage: Store between 5°C (40°F) and 25°C (77°F) for best results.
Shipping: Not dangerous goods
Approvals:
Environmental Canada Ecologo Certification
Exempt from CFIA approval
CARB compliant <4%wt
VOC’s: Zero
NSF Registered
